Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the Water Level
Adjust the Water Level
Adjust the tank water level to the marked waterline.
Rotate the threaded rod clockwise to raise the water level or
counterclockwise to lower the water level, as needed.
Periodically check for leaks for several days following the
installation.
Troubleshooting Guide
NOTE: This troubleshooting guide is for general aid only. For
warranty service, contact your dealer or wholesale distributor.
Symptoms
Recommended Action
1.
Poor flush.
A. Adjust the tank water level to match the
waterline.
B. Fully open the water supply shut-off valve.
C. Clear obstructions from the trapway, jet, or bowl
rim holes.
D. Clear obstructions in the soil pipe or vent pipe.
2.
No flush.
A. Reconnect the flapper chain to the trip lever or
flush valve.
B. Adjust the flapper chain assembly to remove
excessive slack.
Kohler Co.
Threaded Rod
Waterline
5
1020456-5-B
Publicidad
