Untitled-14 33
4. Remove the two screws from the lever
holder, and then remove the holder
cover.
5. Put the lever holder on the other side
as shown, and then tighten the screws.
Install the holder cover on the opposite
side as shown.
6. Use a flat-head screwdriver to remove
the two hinge covers from the original
side. Install the hinge covers on the
opposite side as shown.
7. Locate and remove the 10 screws as
shown. Note that screw B (x2) is longer
than the others.
B
8. Remove the glass holder, and switch
the positions of:
a. the hinge cover and the door handle.
b. the hinge holder and the glass-guide
holder
9. Remove the door lever, and then move
it to the other side as shown.
English 33
2020-06-22
3:16:08