Casselin CRCE100 Manual Del Usuario página 11

1. PRESENTATION
1.1 Information
This user guide serves as information for all its users. It describes the installation and handling of the device.
The safety instructions and technical knowledge of the device are detailed in this manual. They are essential
conditions for the proper use of professional equipment.
Each user must scrupulously follow all the instructions for use. These instructions for use must be kept next
to the product for proper use and access to the instructions at all times for each user.
1.2 Description of symbols
Information, advice on use and safety instructions are represented by symbols. It is essential to follow these
instructions in order to avoid material damage and bodily injury.
WARNING
This symbol means that there is a danger that could result in injury. Concentration and caution are imperative
in operating this device.
ELECTRICAL HAZARD
This means that there is a danger associated with electric current. Failure to follow the instructions can result
in the risk of injury and death.
WARNING
This symbol is used to indicate that failure to comply with the instructions may result in a breakdown or
destruction of the device.
REMARK
This symbol indicates good practices and advice that must be followed for the efficient use of the device.
REMARK
It is essential to read these operating instructions before commissioning the device. We do not accept any
liability for damage and breakdowns resulting from failure to observe the operating instructions. Casselin
reserves the right to make any technical, informative and marketing changes to our product without prior
notice.
1.3 Rights'author
The operating instructions are protected by copyright law. Reproductions of all types and in all forms - even
partial - as well as the use and / or transmission of its content are not permitted without our authorization.
Any violation of these provisions gives rise to the right to damages. The other rights remain reserved.
1.4 Declaration of conformity
The device corresponds to the current standards and directives of the European Union. We confirm this in
the CE declaration of conformity.
EN