Publicidad
Idiomas disponibles
Idiomas disponibles
2. Refill the tank if the fuel level is low.
3. Refuel carefully to avoid overfilling or spilling fuel.
There should be no fuel in the filler neck.
4. Clean up any overflow or splashes of gas before starting the engine.
5. Tighten the filler cap after filling: finger tight only.
SETTING THE CUTTING HEIGHT
As shown in Fig. 13
CAUTION! CAUTION! Adjust the cutting height only when the engine is not running.
NOTE: For shipping purposes the height adjustment position may not be adjusted to the cutting position.
Before operating the mower adjust cutting height to the normal cutting position.
The cutting height is centrally adjusted with height adjusting handle. Different cutting heights can be
selected.
Pull the height adjusting handle out and select the desired cutting height. The handle snaps into the desired
position.
From position 1 to position 7, the cutting heights range from 1.25" to 3.75" (32-95mm).
SETTING REQUIRED FUNCTION
NOTE: This lawn mower has three functions. Change functions by changing the installed
accessories as shown in the following chart.
To convert mower
For rear bagging
For mulching
For side discharging
"√": installed
"×": removed
ASSEMBLY
Fig. 13
1
1.25" (32mm)
Mulching Plug
×
√
√
3.75" (95 mm)
Grass Bag
√
×
×
14
Side Discharge Chute
×
×
√
Hotline: 1-866-902-9690
Publicidad
