Lenco LBT-190 Manual De Usuario página 9

FOR THE DEFAULT AUDIO-TECHNICA AT-3600L CARTRIDGE, TURN THE COUNTERWEIGHT INWARDS
-
UP TO THE HORIZONTAL LINE ON THE REAR END OF THE TONEARM.
HOLD THE COUNTER WEIGHT WITH ONE HAND, TURN SCALE RING TO "3" AGAINST THE INDEX LINE
-
ON THE SHAFT YOUR ANOTHER HAND AND MAKE SURE NOT TO TURN THE COUNTER WEIGHT, ONLY
TURN THE SCALE RING! THE TRACKING FORCE WILL BE AROUND 3.0 GRAM (+/-0.4 GRAM).
IF NECESSARY, TURNING THE COUNTER WEIGHT INWARDS INCREASES THE TRACKING FORCE, WHILE
-
TURNING THE COUNTER WEIGHT BACKWARDS DECREASES THE TRACKING FORCE.
FOR OTHER CARTRIDGES, YOU CAN ADJUST THE TRACKING FORCE BY TURNING COUNTERWEIGHT
-
INWARDS OR BACKWARDS. EACH NUMBER ON THE SCALE RING CORRESPONDS TO AROUND
0.4GRAM OF TRACKING FORCE.
ANTI-SKATING ADJUSTMENT
THE ANTI-SKATE ADJUSTMENT PREVENTS THE TONEARM ASSEMBLY FROM SKIPPING ACROSS THE
RECORD FROM THE CENTRIFUGAL FORCE THAT IS CAUSED SPINNING ROTATION OF THE PLATTER. THE
ANTI-SKATING CONTROL KNOB SHOULD BE SET TO THE SAME VALUE AS THE STYLUS PRESSURE. FOR
EXAMPLE IF YOUR COUNTERWEIGHT IS SET TO 3 GRAMS THE ANTI-SKATE VALUE SHOULD ALSO BE SET
TO 3.
9