Publicidad
3.2.
TVCC40011
1
Mounting screws
Glue the drilling template provided where you intend to install the camera. Drill the required holes.
Use the wall plugs and screws provided to mount the camera in place.
Alignment
3.3.
Connecting the video cable
In order to transmit the video signal from the camera to an analogue recorder, a coaxial cable with BNC
plug (male) must be used. The cable lengths between devices must not exceed 800 m (2MPx) or 300 m
(5MPx).
Please note that the camera's image transmission may be disrupted when laying cable
next to power lines or other conducting materials.
Recommendation:
Use TVAC25220 or TVAC25210 suppressor filters to minimise disruptions.
3.4.
Changing the analogue format
The camera is delivered with the analogue TVI format preset. To change the format, unscrew the cover
on the toggle switch and press and hold the button for 5 seconds. The switch will toggle between the
analogue formats in a fixed order:
CVBS->TVI->CVI->AHD
2
Alignment screws
Loosen the fixing ring or fixing screws to point
the camera in the required direction.
10. Panning: 0–360°
11. Fixing ring for panning
12. Tilting: 0–180°
13. Fixing screw for tilting
14. Rotation: 0–360°
15. Fixing screw for rotation
23
English
Publicidad
