Homak GW00550170 Guía De Utilización Y Directivas De Funcionamiento página 3

ASSEMBLY
C
STEP 1
Attach the Bench Legs (B)
to the mounting rails onto 2
the Bench Top (A)
B
You will use two (2) Bolts
(E) and two (2) nuts (F)
to attach each leg to the
Bench Top. A
1
See close-up diagram (1)
1.
for an installation image.
F
STEP 2
Attach the Shelf (C) to the
mounting rails onto the
E
Bench Legs (B).
2.
You will use two (2) Bolts
3
(E) and two (2) nuts (F)
F
to attach each leg to the
Shelf.
See close-up diagram (2)
for an installation image.
E
STEP 3
Align the 2 Drawers (D)
into the glides on the
Bench Top.
The Drawer stop in close-
up diagram (3) may need
to be pushed to allow
the drawer to pass, but
will then keep the drawer
in the glides on future
opening.
- 3 -