Publicidad
Idiomas disponibles
Idiomas disponibles
NVRs and the RISCO Cloud Installer Application
The RISCO Cloud Installer Application provides an interface to your NVR. This
enables you to add an NVR or edit an existing one.
IMPORTANT – An NVR must first be physically installed before adding the
NVR to the system.
Adding an NVR
To add an NVR:
1.
Log into the RISCO Cloud Installer Web Interface (for instructions, refer to
the RISCO Cloud Quick Installer Guide).
2.
From the Sites List page, select the Site you wish to add an NVR.
3.
From the page that opens, click the IP CAMERAS Sub Tab and then the
NVR Side Tab.
Figure 4 Sites List Page
8
Publicidad
