Publicidad
Idiomas disponibles
Idiomas disponibles
• Delay Appliance Load (DAL): The refrigerator responds to a DAL signal by providing
a moderate load reduction for the duration of the delay period. This function controls
functions that consume a lot of energy such as adjusting the Cooling system, running
the defrost cycle, and making ice.
- When the refrigerator operates in DAL mode, "DAL" is displayed on the refrigerator
display.
- DAL mode is automatically deactivated after it lasts for the amount of time
stipulated by the DAL signal (max. 4.5 hours) or when the Peak Demand Off key is
pressed.
• Temporary Appliance Load Reduction (TALR): The refrigerator responds to a TALR
signal by aggressively reducing the load for a short time period. This function reduces
energy consumption by stopping the compressor and controlling the functions that
consume a lot of energy such as the defrost cycle and making ice.
- When the refrigerator operates in TALR mode, "TALR" is displayed on the
refrigerator display.
- TALR mode is automatically deactivated after it lasts for the received duration (max.
15 minutes), or when the Peak Demand Off key is pressed. The mode is immediately
deactivated and the refrigerator returns to the normal state when the door is
opened or closed, or the dispenser is used.
To check the MAC address
1. Tap the Settings icon on the Home screen.
2. Scroll down to and open About Family Hub.
3. The screen displays (among others) the Wi-Fi MAC address.
Peak Demand Off (Override mode)
When you want the refrigerator to ignore the SMART GRID (Demand Response) signal
from the utility company, you can activate Peak Demand Off (Override mode).
When you activate Peak Demand Off (Override mode), the refrigerator ignores the SMART
GRID (Demand Response) signal and is not controlled by the utility company.
Activating and deactivating Peak Demand Off (Override mode)
1. Tap the Fridge Manager icon on the Home screen.
2. Open the Fridge Settings menu on the bottom of the screen.
3. Open the Demand Response menu.
4. Turn the Peak Demand Off (Override mode) on and off. Tap and drag the button to
activate or deactivate "Demand Off".
NOTE
• Alternatively, you can activate or deactivate Peak Demand Off (Override mode) using
the SmartThings app and the Energy Management function. See the next page.
Untitled-1 47
English 47
2021-08-24
11:52:05
Publicidad
