Jata calor VITROTHERM VT150 Instrucciones De Uso página 13

LEGS ASSEMBLING
• The legs (4) must be assembled at the ends of the lower part of the appliance (Fig. A).
• Make coincide the holes of the legs with the corresponding holes of the appliance and screw them
by using the screws of shortest length included (Fig. B).
WALL ASSEMBLING
• Attention: the minimum distances for wall mounting:
From the floor: 20 cm.
From the lateral walls: 15 cm.
• Warning: all objects (table, shelf etc.) must be over the appliance.
• To fix the appliance to the wall:
- Make 3 holes in the wall as showed in the figure C.
- Before making the holes, it is necessary to measure the distances A and B between the wall
supports (6) placed in the back side of the appliance.
- Insert the pads into the holes and next the screws.
- Do not insert totally the screws, doing this operation the head of the screw must be separated
from the wall for some millimetres.
- Place the appliance Mekong coincide the supports (6) with the screws.
- Next slide slightly to the left side to leave it correctly fixed.
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Turn the thermostat knob (1) clockwise to its maximum position (MAX).
• Select the desired power with the power switches (2) having in mind:
- Pushing one of the switches (I or II): minimum power.
- Pushing both switches (I + II): maximum power.
• When the room reaches the desired temperature, turn the thermostat knob (1) anti-clockwise
until the indicator or indicator lights of the switches switch off which indicates that the thermostat
has been disconnected.
• Leave it in that position and the thermostat will maintain the selected temperature with the
consequent energy saving.
• When you do not use the heater, switch off the switches, place the thermostat knob in the off
position and unplug the appliance from the main.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, ensure the appliance is unplugged from the mains.
• Leave cool down the warm parts and clean with a soft dry cloth.
• Keep clean the air entrance and output grid.
• Never use chemical or abrasives, metal scourers, which may deteriorate the surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the
environment.
13