Lenco PA-60 Manual Del Usuario página 10

recommended
LINE IN
- Press the "Source" Button and select
to LINE, LINE will show on the RED
LED display.
- Plug in your 3.5mm cable into the
LINE IN put on the side panel and the
unit will enter into LINE IN mode.
- You can connect any audio device that
has 3.5mm audio output jack and
playback any audio from the
connected device.
RECHARGING
- Unit comes with a battery indicator alert.
- If Battery Low LED flashes, it means the
battery level is low and recharging is
required.
- By connecting the AC power, the Battery
Full LED will turn RED, it means the unit is
under recharging.
- The Battery Full LED become green, it
means the level of battery is fully charged.
It is recommended to charge the
battery about 6 hours before you start
using the unit for the first time.
Caution: To keeping and protecting the
rechargeable battery in good condition,
users should check the unit and be sure to
turn the Power On/Off switch on the side
panel to "Off" every time after using and
before storage, it is highly recommended
that users should fully recharge the battery
at least once in every two months.
REP EQ
TU-/ TU+ /
SOURCE /
STANDBY BT OFF
wall outlet
REP
TU-/
SOURCE
STANDBY
10
ECHO- ECHO+
VOL + MIC - MIC +
VOL -
/
STD-BY BT Low Full
Battery LIGHT
POWER
ON
OFF
LINE IN DC JACK
USB 1A CHARGER
MIC 1 MIC 2
EQ
ECHO- ECHO+
TU+ /
VOL - VOL + MIC - MIC +
/ /
STD-BY BT Low Full
Battery
BT OFF
Low Full
Battery
POWER
POWER
ON OFF
ON OFF
LINE IN LINE IN DC JACK DC JACK
USB USB 1A CHARGER Charge<1A
MIC 1 MIC 1 MIC 2 MIC 2
LIGHT