Publicidad
Idiomas disponibles
Idiomas disponibles
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
S10 +
4
PowerLite S10 + : To reduce or enlarge
the image, press the Tele (reduce)
or Wide (enlarge) button on the
projector. You can also use the Zoom
option in the projector's Settings
menu. See the User's Guide on your
projector CD.
PowerLite X10 + /W10 + : To reduce or enlarge the
image, turn the zoom ring.
5
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
6
If your image looks like
or
projector to correct it.
Using the remote control
Make sure the batteries are installed as shown (two included AA batteries).
Turn projector
on and off
Turn off projector
display and sound
Change
presentation
slides (USB
connection only)
Access projector
menus
For more information on using the remote control, see your User's Guide on
your projector CD.
X10 + /W10 +
or
, you've placed the projector off to
, press the
or
buttons on the
Choose which
source to display
Get solutions to
common problems
Control projector
volume
Navigate projector
menus
Troubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on your
computer, check the following:
•
Make sure the power light on the projector is green and not flashing,
and the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to select the computer as the image source.
•
If you're using a Windows notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be labelled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7).
•
On a Macintosh, select the Mirror Displays setting in the System
Preferences Displays utility.
Where to get help
Manual
For more information about using the projector, install the User's Guide from
your projector CD.
Internet Support
Visit www.latin.epson.com for solutions to common problems. You can
download utilities and documentation, get FAQs and troubleshooting advice,
or e-mail Epson (site available only in Spanish and Portuguese).
Telephone Support Services
You may speak to a support service representative by dialing one of the
following numbers. (Toll or long distance charges may apply.)
Country
Telephone Number
Argentina (54 11) 5167-0300
Brazil
(55 11) 3956-6868
Chile
(56 2) 230-9500
Colombia
(57 1) 523-5000
Costa Rica (50 6) 2210-9555
800-377-6627
If your country does not appear in the list, contact the Epson sales office of
the nearest country.
Purchase Supplies and Accessories
You can purchase screens and other accessories from an Epson authorized
reseller. To find the nearest reseller, call your nearest Epson sales office as
described above.
Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko
Epson Corporation. PowerLite is a registered trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 5/10
Printed in XXXXXX
. You may have to hold down the
Country
Telephone Number
Mexico
Mexico City
(52 55) 1323-2052
Other cities
01-800-087-1080
Peru
(51 1) 418-0210
Venezuela
(58 212) 240-1111
Publicidad
