Publicidad
Idiomas disponibles
Idiomas disponibles
9. How to use the LED light
While the switch is pulled, the LED light will
automatically light up the tip portion of the tool.
(Fig. 20)
The LED light will automatically turn off 10 seconds
after the switch is released.
CAUTION
● Do not expose directly your eye to the light by
looking into the LED light.
If your eye is continuously exposed to the light,
your eye will be hurt.
● Wipe off any dirt or grime attached to the lens of
the LED light with a soft cloth, being careful not
to scratch the lens.
Scratches on the lens of the LED light can result
in decreased brightness.
HIgh / Low mode setting
High / Low mode
Indicator lamps
Maximum unloaded speed
(/min)
Auto stop / Auto slow mode
Uses
Trigger switch
Fig. 20
1
600
For work that requires fi ne adjustments.
10. Tightening mode selector function
CAUTION
● Do not subject the switch panel to shock or
damage.
● Select tightening mode while the trigger switch
is released. Failure to do so could result in
malfunction.
Tightening torque can be adjusted according to the type
of work by combined use of the High / Low mode selector
switch and the auto stop mode selector switch. (Fig. 21)
Auto stop mode
High / Low mode
selector switch
selector switch
(1) High / Low mode selector switch (Fig. 22)
The tightening mode switches between 4 diff erent
rotation speeds each time the High / Low mode
selector switch is pressed.
1
2
2
900
1,200
OFF
For work that
requires the power
to be suppressed.
English
Fig. 21
3
4
Fig. 22
3
4
1,500
For work that
requires power and
speed.
17
Publicidad
