Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Cordless snow shovel upper pole assembly
• Cordless snow shovel lower pole assembly
• Middle pole
• Joint-fixing knob, washer and bolt (2 sets)
• iON+ 24V lithium-ion battery
• iON+ 24V lithium-ion battery charger
• Manual with registration card
1. Carefully remove the cordless snow shovel and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless snow
shovel. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
Connecting the Poles
1. Slide the middle pole into the lower pole assembly and the
upper pole assembly. Align the screw holes (Fig. 1).
Fig. 1
Lower pole
assembly
2. Insert the joint-fixing knobs through the aligned holes in
the poles and secure the other end with the washers and
the joint-fixing knobs (Fig. 2).
customer service center at
®
Upper pole
assembly
Middle pole
NOTE: You may have to carefully move the wiring inside
the tube to one side if it blocks the path of the bolt.
Fig. 2
Joint-fixing
knob
Washer
Lower pole
assembly
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
m
WARNING!
Before first use, the battery requires at least
1 hr 50 mins charge time to be fully charged. When the battery
is at low capacity, recharge for 1 hr 50 mins again before
resuming operation.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
Lights
Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
8
Upper pole
assembly
Middle pole
Bolt
Publicidad
