EINHELL CE-JS 12 Manual De Instrucciones página 17

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Jump start power bank
•
Jump start cable
•
2-in-1 USB connection cable (Micro/Mini)
•
Charger
•
19V connection cable
•
19V set of connectors
•
Storage case
•
Original operating instructions
•
Safety instructions
3. Proper use
The jump start power bank is designed for char-
ging smart phones, cameras, tablets, etc. It can
also be used as a torch light. In addition, note-
books and 12 V consumers can be supplied with
DC voltage. Used with the supplied jump start
cable the equipment can also be used as a sup-
port for 12 V starter batteries (lead acid batteries)
in motor vehicles with maximum petrol engine
capacities of 4000 ccm and diesel engines with
capacities of up to 2000 ccm.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_CE_JS_12_SPK9.indb 17 Anl_CE_JS_12_SPK9.indb 17
GB
4. Technical data
Jump start power bank
Li-Po battery: .........11.1 V – 3700 mAh – 41.1 Wh
Input: .......................................... .... 15 V d.c./1 A
Charging time, approx.: .................................. 5 h
USB outlet "OUT: "5V/2A": .....5 V d.c. / 2 A (max.)
USB outlet "OUT:"5V/9V":
............................................... 5 V d.c./3 A (max.)
............................................... 9 V d.c./2 A (max.)
d.c. voltage outlet: ......... ..............19 V max. 3.5 A
d.c. voltage outlet: ......... ...............12 V max. 10 A
Jump starting
current: .................... 200 A (5 sec) / 400 A (max.)
Ambient temperature
for jump starting: ....................... + 15 °C - + 40°C
Storage temperature: ................. + 5 °C - + 40 °C
Protection class: ................................................III
Charger
Nominal input voltage: ....... 100-240 V ~50/60 Hz
Nominal output voltage: ........................ 15 V DC
Nominal output current: .................................. 1 A
5. Before starting the equipment
5.1 Charging the jump start power bank with
the charger supplied
The following applies to the charger:
This equipment can be used by children of 8 ye-
ars and older and by people with limited physical,
sensory or mental capacities or those with no ex-
perience and knowledge if they are supervised or
have received instruction in how to use the equip-
ment safely and understand the dangers which
result from such use. Children are not allowed
to play with the equipment. Unless supervised,
children are not allowed to clean the equipment or
carry out user-level maintenance work.
Before you connect the equipment to the power
supply make sure that the data on the rating plate
are identical to the supply voltage.
Important! Pull out the power plug before making
adjustments to the equipment. Charge the equip-
ment only with the charger supplied.
Observe the enclosed safety information with de-
tailed information about charging.
- 17 -
22.02.2018 09:55:30 22.02.2018 09:55:30