it from the mains supply and send it to our
service workshop.
•
The machine must not be tipped whilst it is
being started. Both hands must be on the
handle when you start the machine.
•
Worn parts may only be replaced by our
service workshop. If necessary contact the
service address provided.
WARNINGS
•
Do not use the mower if the connection cable
is damaged or worn.
•
Do not use a damaged cable to connect
the machine to the mains supply and do not
touch a damaged cable whilst it is connected
to the mains. A damaged cable can result in
contact with live parts.
•
Do not touch the cutters until the machine has
been disconnected from the mains and the
cutters have reached a complete standstill.
•
Keep extension cables away from the cutters.
The cutters can damage the cables and result
in contact with live parts.
•
Break the connection with the mains supply
(in other words pull the plug out of the so-
cket):
- whenever you leave the machine unatten-
ded;
- before released a blocked cutter;
- before inspecting or cleaning and before
working on the machine;
- if a foreign body has been struck;
- whenever the machine starts to vibrate
oddly.
•
Carefully read the instructions for how to ope-
rate the machine safely.
•
We recommend that the machine is only con-
nected to a power supply protected by means
of an earth-leakage circuit breaker (RCD) with
a maximum trip current of 30 mA.
How to use electrically powered lawn mowers
safely
Training
a) Read the directions with due care. Familiarize
yourself with the operator controls and proper
operation of the machine.
b) Never allow children or other persons who
are not familiar with the operating instructions
to use the mower. Contact your local govern-
mental agency for information regarding mini-
mum age requirements for the user.
c) Never mow in the direct vicinity of persons -
especially children - or animals.
d) Always keep in mind that the operator or user
Anl_SA_BEM_1032_SPK8.indb 23
Anl_SA_BEM_1032_SPK8.indb 23
GB
of the equipment is responsible for accidents
involving other persons and/or their property.
Preliminary measures
a) Always wear sturdy, non-slip footwear and
long trousers when using the machine. Never
use the machine barefoot or in sandals. Avoid
wearing loosely fi tting clothes or clothing with
hanging belts or cords.
b) Check the ground on which the equipment
will be used and remove all objects that could
be caught up or violently fl ung out.
c) Before using the scythe, visually inspect it
to ensure that the blade, mounting bolts and
the entire cutting apparatus are in good wor-
king order (i.e. not worn out or damaged). To
prevent any imbalance, replace worn out or
damaged blades and mounting bolts as a set
only (if applicable). Worn or damaged cutting
tools must be replaced.
d) Before use, check the power cable and ex-
tension cable for signs of damage and wear.
If the cable is damaged during operation, dis-
connect it immediately from the power supply.
DO NOT TOUCH THE CABLE BEFORE IT IS
DISCONNECTED. Do not use the equipment
if the cable is worn or damaged.
e) Remember that if the machine has several
cutting tools, the movement of one cutting
tool may result in the other cutting tools star-
ting to rotate.
Handling
a) Only mow in broad daylight or in well-lit condi-
tions.
b) Do not use the machine on wet grass.
c) Always maintain good footing on inclines.
d) Only operate the machine at a walking pace.
e) Always mow across hills i.e. never straight up
or straight down.
f)
Be particularly careful when you change di-
rection on a slope.
g) Do not mow on overly steep inclines.
h) Always be extra careful when turning the mo-
wer around and when pulling it towards you.
i)
Switch the mower off , pull the plug and wait
until the cutters have reached a complete
standstill if you need to tip the mower over,
transport it over surfaces other than grass
and if the mower has to be moved from and to
the area you wish to mow.
j)
Never use the lawn mower if the guards are
damaged or without the attached guards, e.g.
defl ectors and/or grass catching devices.
k) Use the ON/OFF switch carefully as descri-
- 23 -
01.12.2016 13:08:50
01.12.2016 13:08:50