Tannoy VSX215B Guia De Inicio Rapido página 7

12 VSX Series
Mounting and Fixing
VSX series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations. All cabinets can be simply
suspended using optional M10 shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk screws and replace them
with eyebolts, which must have a thread length of at least 18 mm. Cabinets may be hung upside down if required.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualifi ed personnel with the required experience
and certifi cation to perform the necessary tasks. Walls, fl oors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory
used must be safely and securely fi xed both to the loudspeaker and to the wall, fl oor or ceiling.
When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners used are of an appropriate size and load rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fi xing arrangement
can be safely employed for a particular load. Cavity plugs or other specialist fi xings, if required, must be of an appropriate type, and must be fi tted and used in
accordance with the maker's instructions.
The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state or national
authorities) personnel prior to any installation or fl ying.
Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed
"Service Information Sheet", assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by qualifi ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is fl own, the
area underneath the speaker is free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can be aff ected by such fi elds (discs, computers, monitors, etc.) at a
safe distance. A safe distance is usually between 1 and 2 metres.
Technical Specifi cations
VSX 215B (P0C2R)
System
Frequency response 48 Hz – 350 Hz, ±3 dB
40 Hz – 450 kHz, -10 dB
Recommended low pass crosssover 90 – 250 Hz, 24 dB/Oct
Nominal dispersion
Power handling (IEC) 2000 W continuous, 8000 W peak
Sensitivity 108 dB (1 W @ 1 m)
Maximum SPL 141 dB continuous, 147 dB peak 136 dB continuous, 142 dB peak
Impedance 4 Ω (parallel), 2 x 8 Ω (discrete)
Components 2 x 15" (381 mm) LF driver 2 x 18" (460 mm) LF driver
Enclosure
Connectors 2 x Neutrik speakON* NL4, 2 x barrier strip terminals
Wiring —
Parallel Pins 1+ / 1- input, pins 2+ / 2- link
Discrete Pins 1+ / 1- input (SUB 1), pins 2+ / 2- input (SUB 2)
Dimensions H x W x D 708 x 1052 x 851 mm
(27.9 x 41.4 x 33.5")
Net weight 90.2 kg (198.4 lbs)
Construction
Finish Semi matt black paint
Grille
Flying hardware M10 x 22 points
Accessories
—
VSX 12.2BP(-WH) (P0BX8/P0BX9)
System
Frequency response 45 Hz – 160 Hz, ±3 dB
37 Hz - 200 Hz, -10 dB
Recommended low pass crosssover 80 – 150 Hz , 24 dB/Oct
Nominal dispersion
Power handling (IEC) 800 W continuous, 3200 W peak
Sensitivity 100 dB (1 W @ 1 m)
Maximum SPL 129 dB continuous, 135 dB peak
Impedance 4 Ω
Components 2 x 12" (316 mm) LF driver
Enclosure
Connectors
Wiring
Parallel
Discrete
Dimensions H x W x D 406 x 830 x 720 mm (16.0 x 32.7 x 28.3")
Net weight 39.5 kg (87.0 lbs)
Construction
Finish
Grille
Flying hardware M10 x 12 points
Accessories
Quick Start Guide
VSX 218B (P0C2T) VSX 118B(-WH) (P0BX6/P0CCQ) VSX 115B(-WH) (P0BX4/P0BX5)
31 Hz – 600 Hz, ±3 dB 40 Hz – 3 kHz, ±3 dB 45 Hz – 3 kHz, ±3 dB
24 Hz – 2 kHz, -10 dB 32 Hz – 4 kHz, -10 dB 36 Hz – 4 kHz, -10 dB
70 – 300 Hz, 24 dB/Oct 80 – 300 Hz, 24 dB/Oct 80 - 500 Hz, 24 dB/Oct
Half space
1000 W continuous, 4000 W peak 800 W continuous, 3200 W peak
103 dB (1 W @ 1 m) 99 dB (1 W @ 1 m)
129 dB continuous, 135 dB peak 128 dB continuous, 134 dB peak
8 Ω
1 x 18" (460 mm) LF driver 1 x 15" (387 mm) LF driver
2 x Neutrik speakON* NL4, 1 x barrier strip terminals
Pins 1+ / 1- input, pins 2+ / 2- link
—
—
594 x 650 x 650 mm 514 x 580 x 580 mm
(23.4 x 25.6 x 25.6") (20.2 x 22.8 x 22.8")
92.9 kg (204.6 lbs) 43.1 kg (94.9 lbs) 33.3 kg (73.3 lbs)
18 mm (¾ ") plywood
Semi matt black paint (white optional)
Powder coated perforated steel
M10 x 24 points M10 x 12 points
Blanking plate for optional VTH pole mount
VSX 10BP(-WH) (P0BX0/P0BX1) VSX 8.2BP(-WH) (P0BX2/P0BX3)
42 Hz – 110 Hz ,±3 dB 46 Hz – 160 Hz , ±3 dB
36 Hz – 130 Hz, -10 dB 38 Hz – 200 Hz, -10 dB
80 – 110 Hz , 24 dB/Oct 80 – 150 Hz , 24 dB/Oct
Half space
200 W continuous, 800 W peak 400 W continuous, 1600 W peak
93 dB (1 W @ 1 m) 97 dB (1 W @ 1 m)
116 dB continuous, 122 dB peak 123 dB continuous, 129 dB peak
8 Ω
1 x 10" (260 mm) LF driver 2 x 8" (212 mm) LF driver
2 x Neutrik speakON* NL4, 1 x barrier strip terminals
Pins 1+ / 1- input, pins 2+ / 2- link
—
—
306 x 590 x 460 mm (12.0 x 23.2 x 18.1") 306 x 725 x 450 mm (12.0 x 28.5 x 17.7")
17.7 kg (39.0 lbs) 24.1 kg (53.1 lbs)
15 mm (5⁄8") plywood
Semi matt black paint (white optional)
Powder coated perforated steel
M10 x 8 points
Blanking plate for optional VTH pole mount
13