Publicidad
Tools Required / Outiles Utiles /
Herramientas Útiles
9 mm
16 mm
This unit meets or exceeds the following:
•
ASME A112.18.1
•
CSA B125.1
•
Lavatory faucets are WaterSense
certified
•
Listed by IAPMO for use in the US
and Canada
2
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - lavatory
Flow rate - bidet
Hole size in mounting surface
spout
valves
Max. depth of mounting surface
*Please know and follow all applicable local plumbing codes when
setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• This faucet requires ½" hot and cold supply lines
(not included).
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
®
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.1 GPM
2.2 GPM
1⅜"
1¼"
1⅜"
Publicidad
