Hansgrohe AXOR Massaud 18020001 Instrucciones De Montaje / Manejo / Garantía página 2

2
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This faucet may be used with a continuous flow
water heater if the flow pressure is at least 20 psi.
• This mixer is equipped with a flush stream, which
enhances the natural side of the life element wa-
ter. As this flush stream does not contain any air,
we recommend the use of Axor Massaud sinks or
very deep sinks to prevent splashing.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*
1.1 GPM
1⅜"
1⅝"