Publicidad
Tools Required / Outiles Utiles
/ Herramientas Útiles
9 mm
16 mm
22 mm
4 mm
2
1¾"
1¼"
3⅞"
⅜"
6"
1⅜"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• This faucet may be used with a continuous
flow water heater if the flow pressure is at
least 20 psi.
• Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
This unit meets or exceeds the following standards:
A112.18.1-2011 / CSA B125.1-11
ICC/ANSI A117.1
This unit is in compliance with the following codes:
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
International Plumbing Code (IPC®)
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.5 GPM
1⅜"
1⅝"
Publicidad
