Storage; Troubleshooting - Easy Home MD 17922 Manual Del Usuario

Storage

All parts must be completely dry before being stored.
− Always store the sewing machine in a dry area.
− Protect the sewing machine from direct sunlight.
− Store the sewing machine so that it is not accessible to children, securely
locked away and at a storage temperature between 41 °F and 68 °F (+5 °C
and +20 °C - room temperature).

Troubleshooting

Problem
No power or the sewing
machine runs slowly
Skipping stitches
Bobbin thread cannot
be drawn up
Thread keeps breaking
Possible cause
Batteries are installed
incorrectly
Batteries are low
Incorrect or defective
power adapter
Needle eye not in the
middle
Needle bent
Presser foot too loose
Lower thread has been
used up
Needle threaded
incorrectly
Needle bent
Needle shank not
properly seated
Thread tension dial,
thread guide, or thread
pulling bar too tight
Solution
Reinstall the batteries,
making sure the
polarity (+/–) is correct.
Install new batteries.
Use the correct and
functioning power
adapter
Remove and re-insert
the needle with the flat
side of the needle to
the back.
Insert a new needle.
Tighten the presser
foot.
Replace with a full
bobbin.
Re-thread the needle,
making sure it is
threaded from front to
back.
Insert a new needle.
Remove and re-insert
the needle.
Loosen the thread
tension number to
between 3 and 5.
Storage
29