OS
- Microsoft
XP / XP 64-bit compliant
Certifications
- FCC, CE, WHQL
- EuP Ready (EuP ready power supply is required)
(see CAUTION 17)
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1.
This motherboard supports CPU up to 95W. Please refer to our website for
CPU support list. ASRock website
2.
This motherboard supports Untied Overclocking Technology. Please read "Un-
tied Overclocking Technology" on page 21 for details.
3.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 12 for proper installation.
4.
Whether 1600MHz memory speed is supported depends on the AM3 CPU
you adopt. If you want to adopt DDR3 1600 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
5.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
TM
Vista
/ XP. For Windows
6.
Whether 1066MHz memory speed is supported depends on the AM2+ CPU
you adopt. If you want to adopt DDR2 1066 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
7.
The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check NVIDIA
information.
8.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 24 of "User Manual" in the support CD to
adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA
hard disk to SATAII connector directly.
9.
Power Management for USB 2.0 works fine under Microsoft
64-bit / 7 / Vista
TM
ASRock
®
®
Windows
7 / 7 64-bit / Vista
http://www.asrock.com
http://www.asrock.com
®
OS with 64-bit CPU, there is no such limitation.
http://www.asrock.com
®
64-bit / Vista
TM
/ XP 64-bit / XP SP1 or SP2.
N68C-SE
Motherboard
TM
TM
/ Vista
64-bit /
®
7 /
website for the latest
®
Windows
®
7
7 7 7 7 7