cecotec ThermoSense 220 Steel Manual De Instrucciones página 9

• Do not put your face in the vapour direction to avoid skin burn.
• To avoid skin burn, do not take off the cover while the kettle is working.
• Open and close the cover carefully while the kettle is hot.
WARNING: be extremely careful when moving the kettle with boiled water from one place to another. Never
use the cover to hold it. Always use the handle.
• Do not put an empty kettle working.
• Do not use the base for different purpose that its destined for.
• Do not open the cover during the boiling process nor minutes before or after the boiling point to avoid burn.
3. OPERATION
Before use the machine for the first time, water should be boiled in it twice without any additives.
• Fill the kettle with water. Do not overfill. Use the water level indicator.
• Place the kettle flush on the base.
• Electrical connection: make sure that the mains voltage matches the voltage on the label of the appliance.
• Press the start button to initiate the process.
• After boiling the machine switches off automatically.
• Do not open the lid when pouring.
4. CLEANING AND MAINTENANCE
Always remove the plug from the mains supply before cleaning the machine!
• The exterior of the jar should be cleaned if necessary with a slightly damp cloth without additives.
• It is recommended to clean the calcium, fill with half of water, add one lemon juice to the water and let
it boil, repeat the process if necessary. Let it cool to be more effective. Wash it with only water and its
ready to use.
5. TECHNICAL SPECIFICATIONS
Model: ThermoSense 220 Steel
Product reference: 01513
Capacity: 1.2L
Rated power: 1370-1630 W
Rated voltage and rated frequency: 220-240 V ~ 50/60 Hz
Made in P.R.C. | Designed in Spain
01513_ThermoSense 220 Steel_Manual_DS.indd 9
ENGLISH
THERMOSENSE 220 STEEL 9
23/1/18 14:02