Publicidad
Idiomas disponibles
Idiomas disponibles
INFORMATION ON ASSEMBLY
•
The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
•
Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
•
Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembly is completed.
•
Please note that there is always a risk of injury when using tools to carry out
manual tasks. Therefore, please exercise caution when assembling this product.
•
Make sure your work environment is hazard-free. For example, do not leave any
tools lying around.
•
To assemble the water rower, first insert (but do not tighten) all screws into their
intended bores, align all the product parts, and then tighten the screws.
•
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
•
Make sure that all screws and nuts are securely tightened before using the product.
39
Publicidad
