Error detection:
Before you contact our service center, please check the following:
Problem
Motor does not start -Power
Suction
power
is
weaker
Technical data:
Rated voltage: 110V AC
Rated frequency: 60Hz
Power: 1400W
Operating pressure: ≥
Sound level: <85dB(A)
Operating radius: 6m
Specification:
Vacuum cleaner x 1
Flexible hose x 1
Wet brush x 1
Operating instructions x 1
Extension tube x 2
Assembled brush x 1
Shematic diagram:
P-6
Dry up the dust filter.
Assemble the vacuum cleaner.
Possible reason
cord
not
plugged into outlet.
-Outlet damaged.
-Cleaner not switched on.
-Unit clogged
-Dust filter needs cleaning
-Dust
container
position.
-Filter blocked
16
kPa
Advice
firmly
-Plug unit firmly.
-Check the Outlet.
-Switch on the appliance
-Remove the blockage.
-Clean the dust filter.
not
in
-Attach the dust container again
to the cleaner.
-Clean the filter.