Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
After self-cleaning
• The door stays locked until the internal oven temperature falls below 400 °F.
• When the oven has cooled down, wipe the oven surfaces with a cloth to remove
ash residue.
• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be
removed using a vinegar-soaking cloth.
• If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears
on the display until the oven cools down. Wait until the message disappears, and
then start a new cycle.
• The cooling fan automatically runs for certain amount of time after self-cleaning.
• Self-cleaning does not operate within 2 hours after running the self-cleaning
cycle.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is
complete. The oven is still very hot when the door unlocks. Escaping hot air and/or
steam could burn you.
38 English
NX58M9420S_DG68-00905A-07_EN+MES+CFR.indb 38
Replacing the oven light
Oven light
The oven light is a standard 40-watt appliance bulb. It comes on when you open
the oven door.
1. Turn off the oven.
2. Make sure the oven and oven light are
3. Open the door, and remove the glass
4. Remove the oven light from the socket
Remove
Replace
5. Insert a new 40-watt appliance bulb into
Glass bulb cover
Bulb
6. Reinsert the glass cover, and then turn it
CAUTION
To prevent electric shock, make sure the oven is turned off and cool before
replacing the oven light.
NOTES
• The oven light does not operate during the self-cleaning cycle.
• Remove the racks if they prevent you from accessing the oven light.
cool.
cover by turning it counterclockwise.
by turning it counterclockwise.
the socket, and then turn it clockwise to
tighten.
clockwise to tighten.
2019-02-28
12:18:10
Publicidad
