12
12A: Place the plate with the components
previously welded, bolt for your 4
ends with U screws and secure them
with nuts S from the bottom of the
chassis.
1. Press and hold the button on the left to raise the elevator car.
2. Press and hold the button on the right to lower the elevator cab.
Input: 9V - - - (square battery)
12B: Connect the dupont cable
as indicated in the image.
FUNCTIONING
SPECIFICATIONS
12D: Place one
9 V battery in the
hole and connect it to
brooch.
12C: Solder the cables
of the battery clip or
piece J1, as
shows in the image.
Pay attention to the
polarity of the cables
Buttons