OPERATIONAL ELEMENTS AND CONNECTIONS – FRONT PANEL
2
1
4
3
7
1 ON/STBY
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate the
power switch located on the rear of the device.
Conversely the device can be switched from
power operation to the standby mode.
2 LED STATUS INDICATION
This illuminated display indicates the MC 400's
2 possible states:
• LED is illuminated green: The MC 400 is
switched on. The device is ready for use.
• LED is illuminated red: The MC 400 is in the
standby mode.
3 LINE IN
3.5 mm stereo input jack for an auxiliary audio
device (e.g. MP3 player, etc.).
4 HEADPHONES
6.3 mm stereo output jack for headphones. The
speakers are deactivated when this jack is used.
Set the volume to a low level before connecting
headphones.
8
11
13
5 SOURCE (INPUT SELECTOR SWITCH)
Switches between the different audio sources:
• CD: CD player.
• BT: Connection to a Bluetooth device
• DAB INPUT: Selection of the DAB/DAB+ tuner
• FM INPUT: Selection of the FM tuner
• AUX 1/2: Other audio devices
• HDMI: HDMI (ARC) input
• DIGITAL OPT, DIGITAL COAX:
Connecting to digital audio sources.
• LINE IN: Front input for portable devices
• NETWORK: Network/streaming input, control
via the app
• NET RADIO: Internet radio input, control via
the remote control
• PHONO: Record player with a moving magnet
system (MM)
6 TUNING -/+
FM mode:
• Brief press: Changes the receiving frequency
in 50kHz increments (FM) (manual station
search).
16
6
15
5
• Press and hold: Searches for the next station
(automatic station search).
DAB mode:
• Selects the next or previous station in the DAB
band.
7 USB INPUT
For connecting USB storage media up to
8 GB (FAT 16/32). (MP3 and WMA files)
8 CD SLOT
Insert a CD into the slot with the label facing
upwards. The CD will be drawn in automatically.
9 STOP/HOME
Stops a CD that is playing.
Home for NET RADIO mode
10 PLAY/PAUSE
Press to start and pause playback of a CD.
11 EJECT
Opens or closes the CD compartment.
16
12 SEARCH/SKIP/MENU
CD/USB mode:
Search/Skip backwards
• Rotated briefly to the left: Playback starts at the
beginning of the current track.
• Rotated briefly to the left x2: Playback starts at
the beginning of the previous track.
• Rotated to the left and held: High-speed rewind.
Remains active for as long as the knob is held.
(only in CD mode)
SEARCH/SKIP FORWARDS
• Rotated briefly to the right: Playback starts at
10
the beginning of the next track
9
14
12
• Rotated to the right and held: Fast forward.
Remains active for as long as the knob is held.
(only in CD mode)
MENU settings
Press the knob (for a few seconds) to access the
menu for setting the sound and adjusting further
parameters. Turn the knob to navigate through
the menu. Press the knob again to confirm the
set parameters.
For further information see also the following
chapters:
• THE MC 400'S MENU
• NETWORK SETUP
13 VOLUME
For adjusting the overall volume of the music.
(can be adjusted between -87 dB and 0 dB)
14 RETURN
Press the Return button to revert back to the
previous Settings menu.