Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the upper right hinge from the top
right side of the cabinet. Remove the door from
the cabinet. Remove the hinge sleeve and hole
covers from the top of the door.
2. Remove the door stop, the actuator and the door
axis from the bottom of the door.
3. Install the door stop, the actuator and the door
axis on the top of the door. The door will need to
be fl ipped 180° before being reinstalled on the
cabinet to ensure that the door handle is on the
correct side.
4. Remove the kickplate. Remove the roller door
support from the lower left side of the cabinet.
Remove the lower right hinge from the lower
right side of the cabinet.
5. Install the roller door support on the lower right
side of the cabinet. Install the lower left hinge on
the lower left side of the cabinet. The lower left
hinge can be found in the accessory bag. Install
the kickplate.
6. Rotate the door 180°. Install the hole covers in
the holes in what is now the top of the door.
Install the door on the cabinet. Install the upper
left hinge. The upper left hinge can be found in
the accessory bag. Before tightening the upper
hinge screws, ensure that the top of the door is
level with the top of the cabinet, that the actuator
is making contact with the switch on the cabinet
and that the rubber gasket makes a good seal
with the cabinet all the way around.
A. Screws
B. Upper Right Hinge
C. Door
D. Hinge Sleeve
E. Hole Covers
F. Door Stop
G. Actuator
H. Door Axis
I. Kickplate
J. Roller Door Support
K. Lower Right Hinge
L. Lower Left Hinge
M. Upper Left Hinge
1
A
B
2
F
3
F
4
J
5
L
6
10
D
E
C
G
H
H
G
I
I
A
E
M
K
J
Publicidad
