Publicidad
STEP 7
(x34)
#A21110
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
systembuild.com
7
Carefully place unit on its front side.
CAUTION:
When turning unit over to attach back
panel, the slides will slide out.
raw surface
B
Q
Flush the edge of the back panel with the
bottom edge of the bottom shelf. Align squarely
and nail straight through into back edges.
15
7
D
Publicidad
