Publicidad
Idiomas disponibles
Idiomas disponibles
aDJustinG tHE FREEzER DRawER LEVEL
1. Locate the height-adjuster (
Unscrew the four Phillips screws (
2. Loosen the controller screw(
3. Find the best level to align the door slope.
After adjustment, first tighten screw(
Adjustment part
) in the freezer drawer.
1
) slightly to loosen the door.
2
1
2
) with a Phillips screwdriver.
3
Example) The slope is about 2mm (0.08inch) as shown below.
Reference
plane
- Rotate the Height Adjuster to -2.0 to reduce the door slope.
) and then screw(
3
Slope
) .
2
Freezer Drawer
3
Setting Up _17
Publicidad
