Descargar Imprimir esta página

Garland CHIPPER 790 QG Manual De Instrucciones página 115

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
- Unscrew the plug again and check the mark left by
the oil on the dipstick. The mark left by the oil must
be between the minimum and maximum marks.
- If the mark is below the minimum add a little more
oil and recheck.
- If the mark is above the maximum you will have
to remove oil from the crankcase. To do this, tilt
the machine and let out a little oil (put a container
PEÇAS
Óleo do motor
Filtro de ar
Correia de transmissão de tensão
Velas de ignição
Silencioso
Depósitos de sedimentos
combustível
Filtro de sedimentos do tanque de
combustível
Tubo de entrada de combustível
at the end of the tube to prevent oil spilling from
the machine or onto the ground).
8.4. MANUTENÇÃO PERIÓDICA
Uso apenas reposição adequada para esta máquina
para obter um desempenho adequado da máquina.
Essas peças de substituição podem ser encontradas
em distribuidores oficiais da máquina. Usar outras
peças de reposição podem por causar danos ao
usuário, aos que estejam perto e a máquina.
Faça a manutenção seguinte com a frequência
especificada na tabela a seguir:
AÇÃO
Verifi que o nível
Trocar
Comprovar
Limpar
Substituir
Limpar e ajustar
Ajustar
Substituir
Limpar
Limpar
Limpar
Verifi car e substituir si necessário
115/148
Português

Publicidad

loading

Este manual también es adecuado para:

Chipper 790 qg-v23Chipper 790 qg-v19