Descargar Imprimir esta página

Insignia NS-LCD27FS Guia Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

Insignia NS-LCD27FS 27" LCD TV
Connecting speakers
To connect speakers to your TV:
1 Unplug the TV power cord and all devices
connected to your TV.
2 Place your TV, face down, on a soft surface
so that you do not damage the screen.
3 Attach each speaker and fixed board (1) to
the back of your TV with the supplied
screws (2), then tighten the screws.
4 Snap the covers (3) over the speakers.
5 Connect the speakers to the speaker jacks
on the back of your TV. Make sure that you
connect the black part of the speaker wire to
the – jack and the red part of the speaker
wire to the + jack on the back of your TV.
Note
The location of the speaker jacks on your TV may
vary from the illustration.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
75 ohm cable
300-ohm cable
If your antenna cable has a 75 ohm connector,
connect the cable to the coaxial jack on the back
of your TV.
If your antenna cable has a 300 ohm connector,
connect the cable to a 300-75 ohm adapter (not
included), connect the adapter to a 75 ohm
cable, then connect the other end of the 75 ohm
connector to the coaxial jack on the back of your
TV.
Use the following illustration to connect an
outside antenna.
VHF/UHF
antenna
300-ohm cable
with adapter
Antenna cable
Connecting cable TV
Your TV has a 75 ohm jack for connecting cable
TV.
Some cable TV providers scramble the signals
for "premium" (pay) channels. To view these
channels you need a converter/descrambler
box.
If you do not have a converter/descrambler box,
you can connect your cable TV directly to your
TV. If you have a converter/descrambler box,
you can connect your cable TV using an RF
switch (not supplied). For more information
about connecting a converter/descramble box,
contact your cable TV provider.
To connect cable TV without a
converter/descrambler box:
1 Connect one end of a 75 ohm cable to the
coaxial jack on the back of your TV.
2 Connect the other end of the cable to the
cable TV wall outlet.
www.insignia-products.com
VHF/UHF
antenna
OR
75-ohm
cable
Combination antenna
Separate antennas
UHF
antenna
IN
OUT
VHF
antenna
300-ohm
Combiner
twin-lead
75-ohm
cable
9

Publicidad

loading