Onkyo CS-355 Manual De Instrucciones página 22

Playing Your iPod/iPhone/iPad
This section describes the procedure for using the
remote controller, unless otherwise specified.
• Before using your iPod/iPhone/iPad with the CD
receiver, be sure to update your iPod/iPhone/iPad with
the latest software, available from the Apple Web site.
• Depending on your iPod/iPhone/iPad, or the type of
content being played, some functions may not work as
expected.
Playing an iPod/iPhone/iPad via USB
Compatible iPod/iPhone/iPad models
Made for:
iPod touch (1st, 2nd, 3rd and 4th generation), iPod nano
(2nd, 3rd, 4th, 5th and 6th generation), iPhone 4S,
iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPad (3rd
generation), iPad 2 and iPad
1 Press the [iPod] button.
Alternatively, you can use the CD receiver's
[INPUT] button.
Note:
• If "USB" appears on the display of the CD
receiver, the connection mode is set to USB.
Press and hold the [MODE] button until "iPod"
appears to switch the connection mode to iPod.
And then reconnect your iPod/iPhone/iPad with a
USB cable.
2 Connect the USB cable that comes with the
iPod/iPhone/iPad to the USB port on the
front of the CD receiver.
While reading the contents of your iPod/iPhone/
iPad, the message "Connecting" appears on the CD
receiver's display.
"iPod" appears on the display of the CD receiver. If
your iPod/iPhone/iPad is not connected properly,
"No Device" appears.
22
En-
Tip:
• When connecting your iPod/iPhone/iPad with a USB
cable, we recommend you use an official USB cable
from Apple Inc.
3 Press the Play/Pause [1/3] button.
Playback starts.
■ Pausing Playback
To pause playback, press the Play/Pause [1/3] button.
Press the Play/Pause [1/3] button again to resume
playback. You can also pause playback by pressing the
[2] button.
■ Selecting Tracks
To return to the beginning of the track that's currently
playing or paused, press the Previous [7] button.
Press the Previous [7] button repeatedly to select
earlier tracks.
Press the Next [6] button repeatedly to select
subsequent tracks.
■ Fast-Forward or Fast-Reverse
During playback, press and hold the Fast Forward [4]
button to fast forward, or the Fast Reverse [5] button
to fast reverse.
■ Random Playback
Press the [SHUFFLE] button repeatedly to switch the
random function of your iPod/iPhone/iPad.
■ Repeat Playback
Press the [REPEAT] button repeatedly to switch the
repeat function of your iPod/iPhone/iPad.
■ Selecting Playlist
Press the PLAYLIST [q]/[w] button to select the
playlist.
Navigating the iPod Menus with the
Remote Controller
1 Press the remote controller's [MENU]
button to display the iPod menu.
2 Use the remote controller's Arrow [q]/[w]/
[e]/[r] buttons to select an item on the
menu, and then press the [ENTER] button.
Note:
• The volume level is adjusted by using the VOLUME
[–]/[+] buttons on the CD receiver or its remote
controller. Adjusting the volume on your iPod/iPhone/
iPad has no effect.
• Depending on your iPod/iPhone/iPad, some functions
may not work as expected.