UFESA MB3000 STUBBLE Manual De Instrucciones página 15

In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s O cial Technical support service may carry out repairs or
procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and
void. Only an authorised technical support service centre may carry out repairs on this
product.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
Always ensure the appliance is switched o before changing any attachments.
Place the desired trimming head on top of the groomer and attach the desired cutting
comb guide.
Switch the groomer on by moving up the on/o switch button (Fig.2) and move down
again to turn it o .
The LED indicator (Fig.9) will turn in green light when the groomer is switched on.
You can choose between di erent cutting fixed comb guides 12/15/18/21mm (Fig.10) or
3-10mm adjustable trimmer guide (Fig.3).
HOW TO PLACE AND REMOVE ATTACHMENTS
A detachable blade system enables you to quickly change from blade for full grooming to
detail trimming blade around a mustache, goatee, or anywhere to define the hair line. To
remove the attachments, simply pull top edge of blade away from the body unit. To attach,
align the back tab of the attachment head to the cavity on the inner edge of trimmer unit
and push down on top of blade.
T-BLADE (Fig.1)
For uniform cutting, allow the trimmer to cut its way through the hair. Do not force it
through at a faster rate.
Select the desired length on the adjustable comb 3-10mm or select the desired guide
combs 12/15/18/18mm. Start by combing the hair so it falls into its natural direction.
Place the largest guide comb onto your trimmer and start by trimming the sides from the
bottom upwards. Hold the trimmer lightly against the hair, with teeth of the guide comb
pointing up but flat against the head. Slowly lift the trimmer up and outward through the
hair, cutting only a small amount at a time. Repeat around sides and back of head.
To trim your beard/mustache hold the groomer with the cutting blade facing you.
Start with edge of beard/moustache line, and with the cutting blades resting lightly against
your skin, use slow movements to create a beard/moustache line.