Descargar Imprimir esta página

Optimus UMX-SYL Instrucciones De Operación página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

6. TECHNICAL SPECIFICATIONS
Audio outputs
Maximum output level
Output impedance
Frequency response (-3 dB)
Signal/noise ratio
Controls (independent for
each audio output)
Indicators
Power supply
Consumption
Output contacts
Position on the matrix
7. SOFTWARE AND FIRMWARE VERSIONS
The functionalities described in this user manual are valid for software and firmware versions that are the same or later versions of:
UMX-SYL Firmware
UMX-03/0 Firmware
UMX-03/0E Firmware
P.A. Manager software
Optimax Flasher software
8. DOCUMENT VERSION TRACKING
Reference system
OPTIMAX 2 / UMX-SYL
Rev
Date
4.2.000 May 2017
Approved by
Ferran Gironès i Puig
UMX-SYL version 4.2.000
2, through connector RJ45. Transformer balanced.
+4 dBm
600 Ohm
100 Hz - 18 kHz
Better than 80 dB
Volume, bass and treble via software.
Power, Priority and Fail indicator lights
Via the matrix
150 mA
FAIL contacts. Configured as open collector: Max. 45 V/500 mA. Configured as voltage free
contacts: Max. 60 V/50 mA
Slots 1 to 10 (UMX-03/0 and UMX-03/0E)
Type of Document
Installation and operating guide
Modifications Content
Position
R&D Director
UMX-SYL
Version 5.0
Application version
Linux version
Version 5.0
Version 4.2
Version 2.9.12
Confidentiality
Card with two audio outputs
with surveillance functions and redundancy
4.2
2.6.35.14
N/A
Written by:
R+D Department
Date
05/2017
9

Publicidad

loading