Publicidad
Idiomas disponibles
Idiomas disponibles
Maintaining your washer
Cleaning mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
If the mesh filter is clogged, the "Cool" LED flashes on the washer's display screen.
42 English
WA3000A_DC68-03850F-00_EN.indd 42
WA3000A_DC68-03850F-00_EN.indd 42
1. Turn off the washer, and then unplug the
power cord.
2. Close the faucet.
3. Loosen and disconnect the water hose
from the back of the washer. Cover the
hose with a cloth to prevent water from
gushing out.
4. Use pliers to pull out the mesh filter from
the inlet valve.
5. Submerge the mesh filter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh filter completely in a
shaded area.
7. Reinsert the mesh filter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the faucet.
2020-12-07
2020-12-07
4:21:05
4:21:05
Publicidad
