Asus WL-320gP Guia De Inicio Rapido página 12

6) Quick Setup in Access Point mode
1. Click Next to enter the Quick Setup
page. Follow the instructions to set up
the ASUS Access Point.
2. Set mode to AP or WDS(Bridge),
Station(Client) or URE(Repeater).
3. Setting up your wireless interface.
Specify to your wireless router an
SSID (Service Set Identifier), which is
a unique identifier attached to packets
s e n t o v e r W L A N . T h i s i d e n t i f i e r
emulates a password when a device
attempts to communicate with your
wireless router via WLAN.
If you want to protect transmitted data,
proceed to steps 4 and 5. Otherwise,
go to step 6.
4. Select a Security Level to enable
encryption methods.
Medium: Only users with the same WEP
key settings can connect to your wireless
router and transmit data using 64bits or 128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.
5. Input one set of WEP keys in the WEP
Key fields (10 hexadecimal digits for
WEP 64bits, 26 hexadecimal digits for
WEP 128bits), and then select from
Key Index accordingly.
You can also let the system generate
the keys by inputting a Passphrase.
Record the Passphrase and the
WEP keys in your notebook, then
select from Key Index accordingly.
Click Finish to enable your setting.
For example, if we input 11111 as
the Passphrase, the WEP Keys are
generated automatically.
6. Click Save&Restart to restart the
wireless router and activate the new settings.
WL320gP_QSG-Final.indd 11
WL-320gP Access Point Quick Start Guide

9/11/07 9:39:36 AM