Descargar Imprimir esta página

Benavent NWC186EE Manual De Uso página 66

Publicidad

Idiomas disponibles

Idiomas disponibles

connected to mains, do not open the
doors frequently or place large quantities
of food in the fridge. Please note that,
depending on the ambient temperature,
it may take 24 hours for your fridge to
reach the operating temperature.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your fridge when connecting or
disconnecting to mains, or when an
energy breakdown occurs. Your fridge
will begin to operate normally after 5
minutes.
• Your appliance is designed to operate in
the ambient temperature (T/SN = 10°C
- 43°C) intervals stated in the standards,
according to the climate class displayed
on the information label. We do not
recommend operating your appliance out
of the stated temperature limits in terms
of cooling effectiveness.
Climate class and meaning:
T (tropical): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating
appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This
refrigerating appliance is intended to be
used at ambient temperatures ranging from
10 °C to 32 °C.
Important installation instructions
This appliance is designed to work in
difficult climate conditions (up to 43
degrees C or 110 degrees F) and is
powered with 'Freezer Shield' technology
which ensures that the frozen food in the
freezer will not defrost even if the ambient
temperature falls as low as -15 °C. So
you may then install your appliance in an
unheated room without having to worry
about frozen food in the freezer being
spoilt. When the ambient temperature
returns to normal, you may continue using
the appliance as usual.
3.5 Accessories
Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.
3.5.1 Ice Tray
• Fill the ice tray with water and place in
the freezer compartment.
• After the water has completely frozen,
you can twist the tray as shown below to
remove the ice cubes.
3.5.2 The Storage Box
You can adjust and use this department for
2 different functions.
Sliding cover
Your fridge is delivered to you with the
cover shown in the open position.
Declared energy consumption and volume
are defined according to the Chiller option
of the product.
To use for 0 °C department:
If you want to use this compartment as a
0 °C box, you must take the sliding cover
(indicated in the picture) from the closed
position to the open position.
To use for Crisper department:
If you want to use this compartment as a
Crisper, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
While this department is used as a 0
°C department, keeping food in the
Chiller, compartment instead of the freezer
or refrigerator compartments, allows food to
retain freshness and flavour for longer,
while preserving its fresh appearance.
EN - 66

Publicidad

loading

Este manual también es adecuado para:

Nwc186eei