Bosch Professional GSB 18V-150 Manual Original página 18

18 | English
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Switch the power tool off immediately if the applica-
u
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
Technical Data
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
1 609 92A 838 | (14.07.2022)
is also designed for impact drilling in brick, masonry and
stone.
With the Bluetooth
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Keyless chuck
(3) Depth stop
(4) Auxiliary handle (insulated gripping surface)
(5) Wing bolt for depth stop adjustment
(6) Torque presetting ring
®
, a
(7) Mode selector switch
(8) Gear selector switch
(9) LED for electronic angle detection (EAD)
(10) Belt clip
®
in the vicinity of
(11) Rechargeable battery
(12) Battery release button
(13) Worklight (user interface)
(14) User interface
(15) Bit holder
(16) Rotational direction switch
(17) On/off switch
(18) Handle (insulated gripping surface)
(19) Bluetooth® Low Energy Module cover GCY 42
(20) Button for electronic angle detection (EAD) (user in-
terface)
(21) LED for preset slope angle of electronic angle detec-
tion (EAD) (user interface)
(22) LED for power tool (user interface)
(23) LED for KickBack Control (user interface)
(24) Button for KickBack Control (user interface)
(25) Auxiliary handle order number 1 602 025 07Y
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
-1
min
-1
min
®
Low Energy Module GCY 42 inserted,
a)
GSR 18V-150 C GSB 18V-150 C
3 601 JJ5 0.. 3 601 JJ5 1..
18
0–550
0–2 200
Bosch Power Tools
®
wire-
18
0–550
0–2 200