LeCellier LC20BU Manual De Utilización página 33

1) Tilt the product back to a certain angle, and use a Phillips screwdriver to remove the two screws
(1) that fix and adjust the lower hinge (3). see figure 1
2) Then grasp the door body (5), and slowly move the lower right door hinge (2) from the upper right
door hinge (4) to the lower front. Place it carefully on a protective cushion. See figure 2
3) Remove the upper right door hinge (4) and the lower right door hinge (2) from the box, pack and
store them for later use. See figure 3
4) Install the upper left door hinge (7) and the lower left door hinge (8) in the box accessory bag at the
corresponding position on the left side of the box body (6). See figure 4
Finally, turn the door back 180 degrees, install it in the reverse order of removing the door, adjust
5)
and level the door, and complete the replacement of the door opening direction.
4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 10-38°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-20°C
or 5-10°C/10-20°C (depending on the model).
LC20BU
33