seeger SAC9000 Manual Del Usuario página 10

Problem
The appliance runs with
reduced capacity.
Water leakage occurs.
The appliance makes
excessive noise.
If the above solutions do not resolve the problem, please contact your reseller.
8.1 Error codes on the display
Error code
E0
E1
E2
Ft
Possible cause
A low fan speed is selected
or the appliance runs in dry
mode.
The air filters are blocked.
There is an open door or
window.
The exhaust hose is
detached.
The appliance has leaked
while moving.
The drain hose is leaking.
The drain hose is kinked or
clogged.
The appliance is not placed
on a flat and stable surface.
Loose parts are vibrating.
The noise sounds like
flowing water.
Possible cause
Communication fault
between PCB and display.
Temperature sensor is
broken.
Coil temperature sensor is
broken.
High water level in the
reservoir.
10
Solution
Select another mode or
another fan speed.
Remove objects from the air
filters. When necessary,
clean the filters.
Close all doors and
windows.
Re-attach the exhaust hose.
Be careful when moving the
appliance.
Replace the drain hose.
Straighten the drain hose.
Unclog a clogged hose.
Choose a suitable location
for the appliance.
Tighten loose parts.
This sound is coming from
the refrigerant and is
normal.
Solution
Contact your reseller.
Empty the reservoir.