Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up the channel list
After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press CH
or CH
channels that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight Auto Ch Search.
3 Press ENTER or
Note
You can press Exit to stop the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To add or delete channels:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight Manual Channel Set. The
Channel Setup Table opens.
3 Press
or
press ENTER to toggle between viewable
and not viewable.
4 Press MENU or EXIT to close the menu.
Changing channels
To change channels:
•
Press CH
or CH
to go to the next lower or higher channel.
Or
Press the number buttons to directly select a
channel (for example, if you want channel 83,
press 8, then press 3).
Or
Press
RECALL to go to the last viewed
channel.
8
, your TV skips the
ENTER
to start the search.
to select a channel, then
on the remote control
www.insignia-products.com
Insignia NS-LCD19-09 19" LCDTV 720P
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel (for example 8).
2 Press –, then press the sub-channel button
(for example 1).
Adjusting the volume
To adjust the volume:
•
Press VOL – or VOL + to decrease or
increase the volume.
•
Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.
Displaying status information
To display status information:
•
Press DISPLAY. Your TV displays status
information, such as the channel number or
signal source.
Checking the DTV signal strength
To check the DTV signal strength:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight DTV Signal. The DTV
signal meter opens.
3 Press MENU or EXIT to close the menu.
Adding a channel label
To add a label to a channel:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press
to enter the sub-menu, then press
or
to highlight Channel Labels. The
Channel Label menu opens.
3 Press
or
to move the cursor to the
channel field, then press
channel.
4 Press
or
to move the cursor to the label
field, then press
character.
5 Press ENTER to return to the previous menu.
or
to select a
or
to select the
Publicidad
