Johnson RM05 Manual De Instrucciones página 16

INDICATORS AND FUNCTIONS
Temperature
Transmitting display
Running mode
Economic operation
CD
Temp: Display the set temperature. Adjust temperature via.6.
andT . No display in this area if the unit is on FAN mode.
® Transmitting display: The icon will flash once when the signal
is sent by remate controller.
@ ON/FF: lean is displayed when the remate controller is turned
on, or vice versa.
®
Running mode: Press MODE to display curren! running mode.
AUTO, COOL, DRY, HEAT and FAN can be selected. (HEAT
function is invalid for cool only type unit.)
@ Time: Display the curren! set time. Press CLOCK for 5s, icon
indicating hour will flash. Press this button again, icon indicating
minute will flash . .6. AndT are used to adjust the figure. Setting
or modification is effective only by pressing OK button to make
confirmation.
® Lock: The icon will be lightened or off when pressing LOCK.
In locked state, all the buttons are ineffective except bullan
LOCK.
(!) Time ON/OFF: In the state of time ON, icon ON will be
lightened, which is the same to the state of time OFF.
Setting timer ON and OFF simultaneously, both icons ON
and OFF are displayed .
5
ON/OFF
Time
Lock
Time ON/OFF
Fan Speed