Installation Procedure; Installing The Software; Connecting The Hardware - Eminent EM3705-R2 Manual De Usuario


CD-ROM with drivers, Arcsoft ShowBiz and Arcsoft MediaConverter

Manual

2.0 Installation procedure

By following the instructions below you can install the drivers and the additional
software of the EM3705 on your computer. We will also explain how to connect the
EM3705 to your video devices.

2.1 Installing the software

1. Place the supplied installation CD-ROM in the CD-ROM drive or DVD drive of
your computer.
2. The installation procedure will start automatically.
3. Follow the steps shown on screen. During the installation, you need to fill in a
name and licensing number. The licensing number can be found on the sleeve of
the CD-ROM.
4. Restart your computer after the installation.
Note! The license number which will be asked during the installation procedure can be
found on the sleeve of the installation CD-ROM.

2.2 Connecting the hardware

Connect the EM3705 to a USB port on your computer. If you wish you can use the
USB extension cable for more freedom of movement.
Connect the special plug (from which four cables extend) from the audio/video input
cable to the EM3705.
Depending on what device you now wish to connect to the EM3705 (for instance a
camera or video recorder) you can use one of the other four plugs of the audio/video
input cable. See the image below:
11 |
ENGLISH