Publicidad
Idiomas disponibles
Idiomas disponibles
6. Cleaning and Maintenance
1. All screws for installing the devices or parts of the device have to be screwed tight and must not be corroded.
2. The housing, the lamps, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections, ...
3. Mechanically moving parts should not show traces of wear and should not rotate out of balance.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
The silk flame has been specially designed and hand cut from the finest silk to interact with the airflow and lights
to create the illusion of a flame. When the silk flame becomes wrinkled, you can iron it with a non-drip iron. You
may carefully cut loose silk strands with a sharp pair of scissors. Silk becomes frayed after a period of one month
or sooner, depending on the environment.
7. There are no user-serviceable parts, apart from the lamp and the fuse (see "4. Installation" on p.2).
8. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power Supply
Power Consumption
Fuse
Dimensions
Total Weight
Lamps
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
1. Inleiding en kenmerken
Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt.
Ga na of het toestel niet werd beschadigd tijdens het transport. Zo ja, raadpleeg uw dealer alvorens te installeren.
2. Veiligheidsinstructies
Wees voorzichtig bij de installatie: raak geen kabels aan die onder stroom staan om
dodelijke elektroshocks te vermijden.
Raak het toestel niet aan wanneer het in gebruik is: de behuizing wordt warm.
Bescherm dit toestel tegen regen en vochtigheid.
Ontkoppel de voedingskabel en open dan pas de behuizing.
VDP75FE
VDP75FE – PROFESSIONAL PYRO EFFECT
max. 230VAC/50Hz
max. 80W
T 1A, 230VAC
237 x 189 x 150mm
3,4kg
230V / 20W MR16 socket x 3 (set LAMPBLFE)
45°C
3
VELLEMAN
Publicidad
