Mounting On A Table; Tidying Cables - LG 55EG920T Manual Del Usuario

16
ASSEMBLING AND PREPARING

Mounting on a Table

(Image shown may differ from your TV.)
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
1 0 c m
2
Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Securing the TV to a wall (optional)
(Depending upon model)
10 cm
1 0 c m
1 0 c m
1
Insert and tighten the eye-bolts or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.
CAUTION
• Make sure that children do not climb on or hang
on the TV.
NOTE
• Use a platform or cabinet that is strong and large
enough to support the TV securely.
• Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
dealer.

Tidying Cables

Gather and bind the cables with the cable holder.
Cable Holder
CAUTION
• Do not move the TV by holding the cable holder,
as the cable holders may break, and injuries and
damage to the TV may occur.