Descargar Imprimir esta página

Simpson PS60869 Manual De Instrucciones página 8

Ocultar thumbs Ver también para PS60869:

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING: To reduce the risk of injury, read the pressure washer instruction
manual and the engine instruction manual before operating pressure washer.
Install the Handle
A
Slide the handle
assembly onto
the frame. Align holes
in the top handle with
the mounting holes in
the handle assembly.
Secure with saddle
bolts and knobs.
IMPORTANT: Ethanol Shield
eliminate and prevent ethanol related problems in power equipment. Follow the
instructions on the container and add to the gasoline.
DANGER:
• Never run engine indoors or in enclosed, poorly ventilated areas. Engine
exhaust contains carbon monoxide, an odorless and deadly gas.
• Risk of fluid injection and laceration. When using the high-pressure setting,
DO NOT allow the high-pressure spray to come in contact with unprotected
skin, eyes or with any pets or animals. Serious injury will occur.
Connect
1
Garden Hose to
Pump
Thread the garden hose
to the pump inlet.
QUICK SETUP GUIDE
Add/Check Oil
B
The engine
is shipped
without oil. Before
starting engine, add
the oil provided. Check
oil level prior to each
use. Refer to Engine
Owner's Manual for
complete procedure.
(sold separately) is a fuel stabilizer that helps
TM
QUICK START GUIDE
Connect High
2
Pressure Hose
to Pump
Connect the high
pressure hose to
the pump outlet.
8- ENG
Add Gasoline
C
In a well
ventilated
outdoor area add fresh,
high quality, unleaded
gasoline with a pump
octane rating of 86 or
higher. Do not overfill.
Wipe up spilled fuel
before starting the
engine. Refer to Engine
Owners Manual for
complete procedure.
Connect High
3
Pressure Hose
to Spray Gun
Connect the other end
of the high pressure
hose to the spray gun.

Publicidad

loading