Matco Tools ES1000G Manual De Instrucciones página 2

WARNING INFORMATION
THIS INSTRUCTION MANUAL USES THE FOLLOWING SYMBOLS AND DEFINITIONS TO ALERT YOU TO HAZARDOUS CONDITIONS WHICH MAY CREATE A RISK
OF PERSONAL INJURY AND/OR PROPERTY DAMAGE.
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL BEFORE USING PRODUCT.
SAVE THESE INSTRUCTIONS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using this engine stand. It is also the responsibility of the engine stand
owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact Mac Tools
for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator's
native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
WARNING
This product must only be used to support an automobile engine while being rebuilt or repaired. Do not use this product for any other purpose. The use of engine
stands are subject to certain hazards that cannot be prevented by mechanical means, but only by the exercise of intelligence, care, and common sense. It is
therefore essential to have owners and personnel involved in the use and operation of the equipment who are careful, competent, trained, and qualified in the
safe operation of the equipment and its proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads,
overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.
WARNING
• Read, study, understand and follow all instructions before operating this device
• Wear eye protection that meets ANSI Z87.1 and OSHA standard (user and bystanders)
• Inspect the engine stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing hardware or components
• Do not use or modify this product for any other purpose than that for which it was designed without consulting the manufacturer's authorized representative
• Do not exceed rated capacity
• Use only on a hard level surface capable of supporting the load
• Make sure all mounting hardware is securely tightened and mounting plate rotating mechanism is locked before rotating engine
• Always use high strength SAE grade 8 bolts for mounting engine to mounting head fingers
• Make sure widest set of mounting head fingers are nearest the ground when mounting the engine to the stand
• Assure the load is centered, balanced and secured to the mounting head and fingers. The engine's weight should be balanced within one inch of the mounting
head's rotational axis
• Adequately support the vehicle before starting repairs
• Never loosen mounting head bolts or engine mounting bolts unless engine is supported by a crane or hoist
• Only attachments and/or adapters supplied by Mac Tools shall be used
• Do not use stand to dolly or transport engine
• Do not crawl under engine or place any part of your body under engine at any time
• Refer to engine manufacturer's service manual for proper lifting points, mounting points and bolt sizes. Mounting bolts should be torqued at appropriate
amount to maintain load
• This product may contain one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands
thoroughly after handling
• Failure to heed these warnings may result in serious or fatal personal injury and/or property damage
WARNING
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, MAINTENANCE INSTRUCTIONS
and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS could cause accidents resulting in serious or fatal personal
injury and/or property damage.
ES1000G
WARNING
2
WARNING: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
5/13/16