Publicidad
Cleaning Recommendation for Hansgrohe Products
Modern bathroom faucets, kitchen mixers and showers consist of very different materials to comply with the needs of the
market with regard to design and functionality. To avoid damage, it is necessary to consider certain criteria when cleaning.
At the cleaning of the fittings and showers, in principle, it must be pointed out:
• Only use cleaning material which is explicitly intended for this type of application.
• Never use cleaning materials, which contain hydrochloric acid, formic acid, chlorine pale lye or acetic acid, as they
cause considerable damage.
• Phosphorus acidic cleaners are only conditionally applicable.
• Do not mix cleaning agents, unless directed by the manufacturer.
• Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge
pads or microfiber cloths.
• Always follow the instructions on the cleaning agent package with respect to specified cleaner dosage and contact
time.
• The building up of calcifications has to be removed by cleaning regularly.
• When using spray cleaners, spray first onto a soft cloth or sponge never directly onto the product, as drops could
enter openings and gaps and cause damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
• The use of steam cleaners is not permitted. The high temperatures can damage the products.
Important
• Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after use.
• The damage of already damaged surfaces will deteriorate under the effect of the cleansers.
•
Components with damaged surfaces must be replaced, otherwise there is a risk of injury.
•
Damage caused by improper treatment is not covered by our warranty.
10
Publicidad
